Buckrakes and Stoneforks

12,14 & 16 Tine Models
Heavy Duty Construction
Front or Rear Linkage Mounting
Mesh & Side Tines on all Models
Suitable for use with Farm Handlers


 

GRAYS HEAVY DUTY PUSH-off BUCKRAKES
Grays Heavy Duty Push-off Buckrakes are available in three widths and five models and are manufactured using robust backframe and a simple but effective pendulum-type swivel linkage ensuring long and trouble free service.


The SGH10 (2.03m wide) with ten 54inch (1.4m) heavy duty tines and the SCH12 (2.36m wide) with twelve 54inch (1.4m) heavy duty tines are fitted with a double-acting ram.
 
SGH10 (2.03m wide) Buckrake
The SGH12T (2.36m wide) with twelve 54inch (1.4m) Heavy duty tines and the SGH14T (2.74m wide) with fourteen 54 inch (1.4m) heavy duty tines are both fitted with a twin double-acting ram and are ideally suited to the larger farmer contractor. All five models are fitted with side tines, mesh on the push off gate and are supplied with feed hoses.

All Grays Buckrakes can be supplied to suit tractor front linkages manufactured to the appopriate British Standard.Adaptor plates are also available to allow any of the five models to be fitted to a wide range of farm handlers.

All Grays Push-off Buckrakes include 32" (810mm) side tines, mesh on gate and tractor feed hoses as standard.
Swivel Linkage Action
 
SGH10
SGH12/12T
SGH14T
SGH16T
Width
6' 8" (2.03m)
7'9" (2.36m)
9'0"(2.74m)
10'4"(3.02m)
No. of Tines
10
12
14
16
Length of Tines
54" (1.4m)
54" (1.4m)
54" (1.4m)
54" (1.4m)
Implement Weights
500kg
500kg - T=660kg
710kg
920kg

 
Heavy Duty Stoneforks
Grays Stoneforks are supplied as standard with 3 point linkage fitting for either the rear linkage or a front linkage if available. All the tines are high quality heat treated tines mounted in full length tapered collars.

The 2m-wide Stonefork
The 2m-wide model has 19 in the bottom section at 4. 1/8" spacing giving 2. ½" gap between the tines at the rear with further 4 tines on each sides

The 1.7m-wide Economy model has 12 tines in the bottom dection at 5.11/16" spacing giving 4" gap between the tines at the rear with a further 2 tines on each side.
The 2m-wide Economy model has 14 tines in the bottom section at 5.11/16" spacing giving 4" gap between the tines at the rear with a further 2 tines on each side.
331 200 - 1.7m economy Heavy Duty Stonefork With 16 Heavy Duty Tines
(12 Base Tines and 2 Side tines each side)

332 200 - 2m Economy Heavy Duty Stonefork with 18 Heavy Duty tines
(14 Base Tines and 2 side Tines each side)

330 200 - 2m Deluxe Heavy Duty Stonefork with 18 Heavy Duty Tines
(19 Base Tines and 4 Side Tines each Side)


Tel: 01461 800 656
Fax: 01461 800 656
Email: info@graysequipment.co.uk